October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal Procedure
- Raise the vehicle. Lifting and Jacking the Vehicle
in General Information.
- Remove two electrical connectors on the side of the EBCM.
Courtesy of GENERAL MOTORS CORP.
- Using a long flat bladed screw driver, release the lock tab on the electrical connector located on the back of the EBCM.
IMPORTANT:
When performing the following service procedure, make sure that the TORX® screw heads are clean for the proper installation of the T 25- TORX® bit. If the TORX® screw are damaged or can not be removed, replace both the EBCM and the BPMV.
Courtesy of GENERAL MOTORS CORP.
- Using a T 25-TORX® bit, remove the 4 mounting screws.
IMPORTANT:
Removal may require a light amount of force. DO NOT pry on the EBCM or the BPMV.
- Remove the EBCM from the BPMV.
Courtesy of GENERAL MOTORS CORP.