October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal Procedure
- Remove the 3 seat switch bezel screws. Refer to Seat Switch Bezel Replacement .
- Remove 4 nuts that attach the seat pan to the seat assembly.
Courtesy of GENERAL MOTORS CORP.
- Remove the clip from the front outboard seat pan stud. Discard the clip.
- Lift the seat pan up in order to allow access to the seat control module retaining screw.
- Remove the seat control module retaining screw.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the electrical connectors from the seat control module as necessary.
- Remove the seat control module from the seat assembly.