LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1445 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Window Switch Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Tracker. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the right front side window switch to the front side door trim panel (4). Ensure that the 4 plastic retaining tabs are fully engaged.
  2. Connect the front side window switch electrical connector.
  3. Install the door trim panel (4) to the front side door. Ensure that the plastic retainers are fully engaged.
  4. Install the screw which secures the front side door pull handle (3).
  5. Install the outside rearview mirror opening cover (1).
  6. Install the front side door inside handle (3). Refer to DOOR HANDLE REPLACEMENT - FRONT INSIDE .
    Fig 1: Installing Front Side Window Switch To Door Trim Panel
    G01408305Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals