LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Starting System >> Starter Motor Replacement >> Installation Procedures
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedures

  1. Install the starting motor through the front area of the engine compartment between the generator and the inner fender. Raise and support the vehicle.
  2. Install the mounting bolts. Tighten the starter motor mounting bolts to specifications. See TORQUE SPECIFICATIONS  .
  3. Lower the vehicle. Connect the positive battery cable to the starter solenoid. Secure with the nut. Tighten the starter solenoid nut to specifications. See TORQUE SPECIFICATIONS  .
  4. Connect the starter solenoid electrical connector. Connect the negative battery cable. Tighten the negative battery cable-to-negative battery terminal retainer to specifications. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals