LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Drain the washer solvent from the washer solvent container.
  2. Remove the right front fender liner.
  3. Disconnect the washer solvent container level sensor electrical connector.
  4. Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.
    5. Fig 1: Washer Solvent Level Sensor
    G01738170Courtesy of GENERAL MOTORS CORP.
  5. Using a small flat-bladed tool, remove the seal from the washer solvent container.
scientia non olet · About LEMON Manuals