October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Programming Verification
- Using scan tool, clear DTCs.
- Attempt to start engine.
- Repeat Service Programming procedure if engine does not start or operates poorly. Perform the following procedures before programming the PCM:
- Ensure the control module and DLC connections are OK.
- Ensure the Techline(R) operating software is up to date.
- Ensure the calibration part number is correct for the vehicle.
- Attempt to program the control module. If the control module still cannot be programmed properly, replace control module.