September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Installation Procedure
- Slide the clip of the channel into the upper channel in order to install the window run channel to the door.
- Install the door to window run channel bolt. Tighten:
Tighten the door to window run channel bolt to 9.5 N.m (84 lb in).
Courtesy of GENERAL MOTORS CORP.
- Install the water deflector. Refer to WATER DEFLECTOR REPLACEMENT - FRONT DOOR
.
- Install the trim panel. Refer to TRIM PANEL REPLACEMENT - DOOR
.