LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Lock System & Remote Keyless Entry System >> Programming >> Feature Customization Modes >> Remote Verification Customization
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Remote Verification Customization

  1. If vehicle is equipped with Remote Keyless Entry (RKE) system, enter feature customization mode. See ENTER FEATURE CUSTOMIZATION MODE  . Press LOCK button on RKE transmitter. Count number of chimes to determine current mode (1-4). See ENTER FEATURE CUSTOMIZATION MODE  table.
    REMOTE VERIFICATION CUSTOMIZATION MODE

    Mode Exterior Lights Flash Horn Sounds
    1 Disabled Disabled
    2 Enabled Disabled
    3 Enabled (1)
    4 Enabled (2)
    (1) Horn sounds only when RKE transmitter LOCK button is pressed.
    (2) Horn sounds only when RKE transmitter LOCK button is pressed a second time within 5 seconds of first press.
  2. To change mode, press LOCK button on RKE transmitter until desired mode is reached. Chime will sound number of times equivalent to mode. Chime indicator sequence will repeat after chime sounds for mode 4. Mode 4 is default mode.
  3. To exit and save current feature customization mode settings, turn ignition switch to OFF position. Reinstall BCM PRGRM (10-amp) fuse. If unable to change modes, diagnose RKE system fault. See REMOTE KEYLESS ENTRY DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
scientia non olet · About LEMON Manuals