LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Bench Testing >> Commutator Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Commutator Test

  1. Disassemble starter. Using "V" blocks and dial indicator, check commutator runout (out-of-round). Replace armature if runout is not within specifications. See STARTER SPECIFICATIONS  .
  2. Check commutator diameter. If commutator is less than specification, replace armature. See STARTER SPECIFICATIONS  .
  3. Using an ohmmeter, measure resistance between commutator segments. If resistance is greater than 5 ohms at any test point, an open circuit exists in commutator. Replace armature.
  4. Clean commutator segment surfaces with No. 400 grit sandpaper (if necessary). If surface is scored, out-of-round, or pitted, replace armature.
  5. Measure depth between commutator segments. If depth is not within specification, replace armature. See STARTER SPECIFICATIONS  .
scientia non olet · About LEMON Manuals