LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Chevy Express G2500, Van Cargo Extended, 5.0 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 GMC Yukon XL, 2001 GMC Yukon, 2001 GMC Sierra, 2001 GMC Cab & Chassis Sierra, and 2001 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control module to the vehicle.
  2. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement (V8) , Cruise Control Cable Replacement (V6) .
    3. Fig 1: Locating Cruise Control Module Nuts (4.3L)
    GM346962Courtesy of GENERAL MOTORS COMPANY
  3. Refer to FASTENER NOTICE in Cautions and Notices.

    Install the nuts in order to retain the cruise control module to the cowl.

    Tighten 

    Tighten the nuts to 9 N.m (80 lb in).

    4. Fig 2: Cruise Control Module Electrical Connector
    GM346969Courtesy of GENERAL MOTORS COMPANY
  4. Connect the electrical connector at the cruise control module.
    5. Fig 3: Upper Fender Brace
    GM346973Courtesy of GENERAL MOTORS COMPANY
  5. Install the brace.

    Tighten 

    Tighten the bolts to 9 N.m (80 lb in).

scientia non olet · About LEMON Manuals