October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Front Stabilizer Component Removal Note
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Detach the silencer hangers on the middle pipe from the front crossmember.
Courtesy of MAZDA MOTORS CORP.
- Lower the front crossmember slowly approximately 3.5" (90 mm) and remove the front stabilizer component.