Cruise Control Functional Switches

Functional control switches are located on the end of the multifunction lever, which also serves as a turn signal lever. Functional control switches include a SET button and a sliding main switch with OFF, ON and RESUME/ACCEL positions.

• OFF
  
  System disengages when switch is turned off.
• ON
  
  System is ready to be set when switch is turned on.
• SET (Set/Coast)
  
  Spring-loaded SET button engages cruise. During engagement, if SET button is pressed and held, vehicle decelerates (cruise disengages) until button is released. When button is released, cruise engages and maintains new set speed. Also, by quickly pressing and releasing (tapping) this button, the set speed is "tapped-down" in one MPH increments.
• R/A (Resume/Accelerate)
  
  Spring-loaded R/A switch will not initially set cruise speed, but when cruise has been disengaged by braking, momentarily sliding this switch to R/A position will cause cruise to resume previously set speed. This is the resume function. Accelerate function occurs when R/A switch is held in position for more than one second. This causes the vehicle to accelerate until switch is released. When released, system maintains new set speed. Also, by quickly pressing and releasing (tapping) this switch, the set speed is "tapped-up" in one MPH increments.