September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Shift Cable (At Manual Control Lever): Installation
- If installing NEW cable, see SHIFT CABLE (NEW CABLE INSTALLATION ONLY)
. If reinstalling used cable, go to next step.
- Insert the shift cable through the dash from the engine compartment side. Install the shift cable to the bracket. See Figure
.
- Install the shift cable to the manual control lever. See Figure
. Install the shift cable to the wiring harness clip. Install the shift cable to the column shift control.
- Adjust the shift cable. See SHIFT CABLE
under ADJUSTMENTS.