LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the child seat tether brackets to the slots in the rear shelf.
  2. Turn the child seat tether brackets 90 degrees to align the child seat tether bracket to rear shelf bolt holes.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the child seat tether bracket to rear shelf bolts.

    Tighten 

    Tighten the bracket to rear shelf bolts to 20 N.m(15 lb ft).

  4. Install the rear shelf trim panel. Refer to TRIM PANEL REPLACEMENT - REAR WINDOW SHELF in Interior Trim.
    Fig 1: Installing Child Seat Tether Bracket To Rear Shelf Bolts
    G01832368Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals