Frame Contact Hoist
WARNING: This page does not describe the selected car, but rather 60 other vehicles, including the 1999 Pontiac Sunfire, 1999 Pontiac Grand Prix, 1999 Pontiac Grand Am, 1999 Pontiac Firefly, and 1999 Pontiac Firebird. However, it is still accessible from the selected car via links, so may be relevant.
Hoist adapters must contact vehicle in specified areas. See Fig 1 - Fig 9 . Adapters must be positioned to distribute load and support vehicle in a stable manner. DO NOT allow lift pads to contact body panels or exhaust system components.
WARNING:
If removing rear axle, fuel tank, spare tire or liftgate using single-post hoist, anchor vehicle to hoist. Place jack stands under vehicle, or add weight on rear end of vehicle to prevent tipping when center of gravity changes.