MIL Operation

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

MIL is located on Instrument Panel Cluster (IPC).

MIL Function

MIL informs driver that a malfunction has occurred and vehicle should be taken in for service as soon as possible.
MIL illuminates during a bulb test and a system test.
A DTC will be stored if a MIL is requested by the PCM.

MIL Illumination

MIL will illuminate with ignition ON and engine not running.
MIL will turn off when engine is started.
MIL will remain ON if the self-diagnostic system has detected a malfunction.
MIL may turn off if malfunction is not present.
If MIL is illuminated and then engine stalls, MIL will remain illuminated so long as ignition switch is ON.
If MIL is not illuminated and engine stalls, MIL will not illuminate until ignition switch is cycled OFF, then ON.