Low-Reverse Servo Assembly: Removal

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Remove the oil feed pipes. See OIL FEED PIPES .
Remove the 3 low-reverse band servo cover bolts, the servo and the spring. See Fig 1.
Disassemble, clean and inspect the low reverse servo assembly. See appropriate OVERHAUL article.

Fig 1: Removing & Installing Low-Reverse Servo

Courtesy of GENERAL MOTORS CORP.