Generator

The CS130D generator is non-repairable. They are electrically similar to earlier models. The generator features the following major components:
^ The delta stator
^ The rectifier bridge
^ The rotor with slip rings and brushes
^ A conventional pulley
^ Dual internal fans
^ A voltage regulator

The pulley and the fan cool the slip ring and the frame. The AD stands for Air-cooled Dual internal fan; the 2 is an electrical design designator; the 30 denotes the outside diameter of the stator laminations in millimeters, over 100 millimeters. The generator (K60) is rated at 100 amperes, the (K68) is rated at 105 amperes.

The generator features permanently lubricated bearings. Service should only include the tightening of mounting components. Otherwise, the generator is replaced as a complete unit.