LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Blazer 2D Utility, 4WD, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 800 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the high-mounted stoplamp sockets to the high-mounted stoplamp assembly, then rotate the sockets clockwise to secure.
  2. Install the high-mounted stoplamp assembly locating tabs (2) into the slots on the rear shelf panel.
  3. Slide the high-mounted stoplamp assembly toward the rear of the vehicle to secure the retaining tabs (1).
  4. Install the rear window trim panel. Refer to TRIM PANEL REPLACEMENT - REAR WINDOW SHELF .
    Fig 1: High Mounted Stop Lamp
    G01616166Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals