Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.




1. Raise the vehicle.
2. Remove the fuel tank.
3. Remove the fuel tank pressure sensor electrical connector.

Description:

4. Remove the fuel tank pressure sensor.

INSTALLATION PROCEDURE

Description:

1. Install the fuel tank pressure sensor.




2. Install the fuel tank pressure sensor electrical connector.
3. Install the fuel tank.
4. Lower the vehicle.
5. Refill the fuel tank.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

6. Connect the negative battery cable.
7. Inspect for fuel leaks through the following steps:
7.1. Turn the ignition switch to the ON position for 2 seconds.
7.2. Turn the ignition switch to the OFF position for 10 seconds.
7.3. Turn the ignition switch to the ON position
7.4. Check for fuel leaks.