LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Malibu Base, 2.4 T >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Data Link Communications Diagnostic System Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Data Link Communications Diagnostic System Check

  1. Connect scan tool to Data Link Connector (DLC). Scan tool should power up. If scan tool powers up, go to next step. If scan tool does not power up, go to SCAN TOOL INOPERATIVE  .
  2. Using scan tool, retrieve any class 2 DTCs. If any BFC DTCs are found, perform appropriate test under DIAGNOSTIC TESTS. See BFC DTC DEFINITIONS  table under SELF-DIAGNOSTIC SYSTEM. If no DTCs are set or scan tool does not communicate with BFC, go to next step.
  3. Using scan tool, communicate with other modules along class 2 serial data line. Scan tool should communicate with all modules. If scan tool does not communicate with modules, go to SCAN TOOL DOES NOT COMMUNICATE WITH COMPONENTS  .
scientia non olet · About LEMON Manuals