LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

Fig 1: Module Retaining Screw
GM284661
  1. Install the electrical connector.
  2. Install the module to the mounting bracket.
    NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  3. Install the screw in order to retain the module to the bracket.

    Tighten  the screw in order to retain the module to the bracket to 2 N.m (18 lb in).

  4. Install the instrument panel extension.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals