LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1998 >> Metro Base >> Repair and Diagnosis >> Electrical >> Starter >> Starting System - M/T >> Bench Testing >> Brushes & Springs
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brushes & Springs

  1. Using ohmmeter, check continuity between positive and negative brush holders. Continuity should not exist. If continuity exists, replace shorted brush holder assembly.
  2. Measure brush length. Brush length should be .45-.67" (11.5-17.0 mm). Check brush springs for corrosion or damage. Ensure spring tension is within specification. See STARTER SPECIFICATIONS  table. Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals