Window Guide Cam

Window Guide Cam:

Installing Window Guide Cam:

REMOVE OR DISCONNECT
1. Raise the window up halfway.
2. Water deflector.
3. Bolts (36) retaining the window guide cam (34) to the door inner panel.
4. Window guide cam (34) by pulling up and back and rotating 180 degrees.
5. Window guide cam (34) through rear access hole.

INSTALL OR CONNECT
1. Window guide cam (34) through rear access hole.
2. Window guide cam (34) to window regulator cam and door inner panel.
3. Bolts (36) retaining window guide cam (34) to door inner panel.
^ Tighten bolts (36) to 11 Nm (97 lb. in.).
4. Water deflector.