September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal & Installation: Window: Installation
- Install door window glass (230). See Figure
. Lower the window into the frame. Push the window forward, then tilt it up, and slide the rear roller into the sash channel. Slide the glass back until the front roller is in line with the notch in the sash channel. Slide the glass rearward into the glass run channel.
NOTE:
Remove any masking or covering.
- Install the vent/window run channel assembly. See VENT/WINDOW CHANNEL ASSEMBLY
.
- Install the trim panel. See TRIM PANEL
.