LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1991 >> Hi-Cube 5.7 K >> Repair and Diagnosis (Single Page) >> Body & Frame >> Power Windows >> Removal & Installation >> Vent/Window Run Channel Assembly >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Vent/Window Run Channel Assembly: Installation

  1. Install Door vent/window run channel assembly (229) to the vehicle. See Figure . Rotate the vent assembly into the door. Fit the assembly into the door frame.
  2. Install the door the ventilator screws (223). See Figure . See TORQUE SPECIFICATIONS  . Start with the screw at the top of the door, and work downward.
  3. Install the door panel to run channel bolt (228). See Figure . See TORQUE SPECIFICATIONS  .
  4. Install the run channel molding (224). Push the corner of the molding into the run channel. See Figure .
  5. Install trim panel. See TRIM PANEL  .
scientia non olet · About LEMON Manuals