LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1991 >> APV >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Inner Tie Rod End >> Disassembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inner Tie Rod End: Disassembly

  1. Remove steering gear and boot. See STEERING GEAR  and BOOT  removal and installation in this article. Remove shock damper ring from inner tie rod.
  2. Place wrench on flat area of rack assembly and wrench on flat of inner tie rod housing. See Fig 1. Rotate inner tie rod housing counterclockwise and separate inner tie rod from the rack.
Fig 1: Separating Inner Tie Rod From Rack
G90D13568Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals