Condenser HVAC: Service and Repair

Condenser:

Front Plumbing Component View:

REMOVE OR DISCONNECT
1. Discharge and recover refrigerant from the system.
2. Grille and front-end panel.
3. Radiator bar support.
4. Refrigerant hose from condenser.
5. Evaporator inlet tube.
6. Bolts.
7. Upper insulators.
8. Condenser.

INSTALL OR CONNECT
1. Condenser.
2. Upper insulators.
3. Bolts.
^ Tighten bolts to 27 N.m (20 ft. lbs.).
4. Evaporator inlet tube.
5. Refrigerant hose to condenser.
6. Radiator bar support.
7. Grille and front-end panel.
8. Refrigerant to the system.
^ Check the system for leaks.