LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1987 >> Monte Carlo LS, 4.3 Z >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - TBI >> Removal & Installation >> Throttle Position Sensor (TPS) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor (TPS): Installation

  1. With throttle valve in idle (closed) position, install TPS on throttle body. Ensure that TPS pick-up lever is located above TPS actuator lever. Install retainers, screws using thread locking compound (Loctite 262), and lock washers.
  2. Connect electrical lead and install air cleaner. With ignition on, connect digital voltmeter to TPS "A" and "B" terminals, rotate TPS to obtain .45-.60 volts. Tighten attaching screws and recheck voltage.