LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1986 >> Sprint Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Feedback Carburetor System >> Testing >> Oxygen Sensor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Oxygen Sensor

  1. Warm engine to normal operating temperature. Disconnect oxygen sensor connector.
  2. Connect voltmeter between oxygen sensor side terminal (of disconnected connector) and ground. See Fig 1 T apply voltage to oxygen sensor.
    Fig 1: Connecting Voltmeter to Oxygen Sensor
    G42236
  3. With engine at 1500-2000 RPM, turn WOT microswitch on by moving microswitch lever. See Fig 2 that voltmeter reads about .8 volts.
    Fig 2: Moving WOT Microswitch Lever
    G42237
  4. With engine at 1000-1500 RPM, disconnect vacuum hose at intake manifold. Check that voltmeter reads near zero. Reconnect vacuum hose and oxygen sensor connector.
scientia non olet · About LEMON Manuals