September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel System Pressure Test
- Turn engine off and relieve fuel pressure. Remove air cleaner
and plug thermostatic air cleaner vacuum port on TBI. Remove flexible
fuel line between fuel tank and filter (near tank).
- Install fuel pressure gauge (J-29658). Start vehicle and observe
reading, fuel pressure should be 9-13 psi (.63-91
kg/cm2
). If fuel pressure is not within specifications,
go to CHART A-5 or CHART A-6 in this article.
- Relieve fuel pressure. Remove fuel pressure gauge and install
fuel line. Start vehicle and check for fuel leaks. Remove plug
covering thermostatic air cleaner vacuum port on TBI and install air
cleaner.