LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2024 >> CT5 V, RWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K124 Image Processing Module: Programming and Setup (with UKL) >> Replace and Program Image Processing Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Image Processing Module

NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement K12 Image Processing Module, perform the following procedure:

  1. Ignition/Vehicle OFF
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K124 Image Processing Module - Programming and follow the on-screen instructions.
  4. Perform the Vehicle Dynamic Sensor Offset Calibration. Refer to: Vehicle Dynamic Sensor Offset Calibration
  5. Clear DTCs.
scientia non olet · About LEMON Manuals