LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Programming And Setup - All Systems) >> Repair Instructions >> K92 Rear Wheel Steering Control Module: Programming and Setup >> Replace and Program Control Module or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Control Module or Reprogram ECU

WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement rear steering control module or reprogram a rear steering control module, perform the following procedure:

  1. Ignition ON.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K92 Rear Wheel Steering Control Module - Programming and follow the on-screen instructions.
  4. Clear DTCs.
scientia non olet · About LEMON Manuals