Electronic Suspension Front Position Sensor Replacement: Installation
WARNING: This page is about a different car, the 2020 Cadillac CT6. However, it is still accessible from the selected car via links, so may be relevant.
Position the front electronic position sensor and bracket (1) to the vehicle.
- CAUTION:
Refer to Fastener Caution .
Install and tighten the position sensor bolt (3) to 9 N.m (80 lb in).
- Install the position sensor link rod (1) to the position sensor link rod ball stud (2).
Reconnect the position sensor electrical connector (1) to the front electronic position sensor (2).
- Remove the support and lower the vehicle.
- Calibrate the Electronic Suspension Rear Position Sensor.