LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> Escalade Base, RWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K83 Park Brake Control Module: Programming and Setup >> Replace and Program ECU or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program ECU or Reprogram ECU

To program a replacement or an existing ECU, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K83 Park Brake Control Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K83 Park Brake Control Module - Setup (OR K83 Park Brake Control Module - Configuration and Setup) and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  5. With a scan tool, perform the Parking Brake Cable Adjuster Enabling procedure. Refer to Parking Brake Cable Adjuster Enabling (With J71) .
scientia non olet · About LEMON Manuals