Removal Procedure
WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
{ If equipped }Front Suspension 4 Corner Leveling System Position Sensor (1)@Front Lower Control Arm - Separate - Front Suspension 4 Corner Leveling System Position Sensor Replacement
Front Lower Control Arm Ball Stud Nut(1) - Loosen
Use the CH-42188-B separator (1) to separate the front lower control arm from the steering knuckle.
- Front Lower Control Arm Ball Stud Nut(2) - Remove
Front Lower Control Arm Front Bolt(1) - Remove and DISCARD[2x]
Front Lower Control Arm Rear Nut(1) - Remove[2x]
- Front Lower Control Arm Rear Bolt(2) - Remove and DISCARD[2x]
Remove the front lower control arm (1) from the vehicle.