Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Position the intermediate steering shaft (1) on the vehicle.

Courtesy of GENERAL MOTORS COMPANY

Intermediate Steering Shaft Upper Bolt (1) - Install and tighten 30 N.m (22 lb ft)

1. Clean the threads of the bolt and mating threads with denatured alcohol or equivalent and allow to dry.
2. Apply thread locking adhesive to the bolt. Adhesives, Fluids, Lubricants, and Sealers 

Courtesy of GENERAL MOTORS COMPANY

Intermediate Steering Shaft Lower Bolt (1) - Install and tighten 50 N.m (37 lb ft)

1. Clean the threads of the bolt and mating threads with denatured alcohol or equivalent and allow to dry.
2. Apply thread locking adhesive to the bolt. Adhesives, Fluids, Lubricants, and Sealers 

Courtesy of GENERAL MOTORS COMPANY

Front Wheel Drive Shaft-Left Side (1) - Install - Front Wheel Drive Shaft Replacement - Left Side

Courtesy of GENERAL MOTORS COMPANY

Engine Front Splash Shield - Left Side Rear (1) - Install - Engine Front Splash Shield Replacement - Left Side (Rear)Engine Front Splash Shield Replacement - Left Side (Front)