LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Battery Distribution Fuse Block Replacement (With HP9) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. GM4477641Courtesy of GENERAL MOTORS COMPANY

    Battery Distribution Fuse Block Retaining Tab (1) - Engage

  2. Battery Distribution Fuse Block (2) - Install
  3. GM4476251Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Cable (2) - Install

    4. CAUTION:

    Refer to Fastener Caution

  4. Battery Positive Cable Nut (1) - Install and tighten 15 N.m (11 lb ft)
  5. Retainer (3) - Engage
  6. GM4477639Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Connect [3x]

  7. Retainer (2) - Engage
  8. GM4475490Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Cable (3) - Install

  9. Battery Positive Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
  10. Battery Positive Post Cover (2) - Install
  11. GM4475465Courtesy of GENERAL MOTORS COMPANY

    Battery Distribution Fuse Block Cover (3) - Install

  12. Battery Distribution Fuse Block Cover Retainer (1) - Engage [2x]
  13. Battery Distribution Fuse Block Cover Fastener (2) - Install and tighten
  14. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals