LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> SRX AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Verification
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Verification

NOTE:

Diagnose all other stop lamp DTCs or symptoms prior to performing this diagnostic procedure.

  1. Ignition OFF, verify the brake pedal position sensor or the brake pedal are not binding causing residual brake pressure to be detected.
    • If a condition is found 

      Repair or replace the applicable component.

    • If a condition is not found 
  2. Ignition ON, perform the Brake Pedal Position Sensor Calibration .
  3. Verify the DTC does not set.
    • If the DTC sets 

      Replace the K17 electronic brake control module.

    • If the DTC does not set 
  4. All OK.
scientia non olet · About LEMON Manuals