Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Install the new sensor grille to the headliner.

Fig 1: Inside Air Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

Install the inside air temperature sensor to the headliner and sensor grille.

Fig 2: Electrical Connector & Inside Air Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the inside air temperature sensor.
Secure the headliner to the roof hook and loop retainers.
Install the rear headliner retainers to the front headliner.
Install the left rear coat hook, if equipped. Refer to Coat Hook Replacement .
Install the third pillar molding. Refer to Center Pillar Upper Garnish Molding Replacement .