EBCM Replacement
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:
- EBCM Reprogramming-Refer to Service Programming System (SPS) .
- Recalibrate the brake pedal position (BPP) sensor. Refer to Brake Pedal Position Sensor Replacement .
- Recalibrate the steering angle position sensor. Refer to Steering Angle Sensor Centering .
- Recalibrate the yaw rate sensor.