LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1008 (Configurable Customer Control System) >> Repair Instructions >> Steering Wheel Control Switch Assembly Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Steering Wheel Control Switch Assembly Replacement

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel Control Switch Assembly
GM1704178Courtesy of GENERAL MOTORS CORP.
Callout Component Name
CAUTION: Refer to SIR Caution .

Preliminary Procedure

  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
  2. Remove the horn switch. Refer to Steering Wheel Horn Switch Replacement .
1 Steering Wheel Trim Cover (Qty: 2)
Procedure: 
Remove the 4 horn contact screws.
2 Steering Wheel Control Switch Assembly Screw (Qty: 4)
NOTE: Refer to Fastener Notice .

Tip:  Quantity may vary with vehicle options.

Tighten:  1 N.m (9 lb in)

3 Steering Wheel Control Switch Assembly (Qty: 2)
Tip: 
  • Quantity may vary with vehicle options.
  • Ensure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.