LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1114 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0035-C0050 >> Component Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Testing

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the wheel speed sensor.
  2. Connect a test lamp between B+ and the wheel speed sensor signal circuit terminal B.
  3. Test for 4-8 mA on the low reading between the low reference terminal A and ground when spinning the wheel very slow.
    • If not within the specified range, replace the wheel speed sensor.
  4. Test for 12-16 mA on the high reading between the low reference terminal A and ground when spinning the wheel very slow.
    • If not within the specified range, replace the wheel speed sensor.