September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Vehicle Direction Alert Alarm Warning Module Replacement
Courtesy of GENERAL MOTORS COMPANY Vehicle Direction Alert Alarm Warning Module Replacement
| Callout |
Component Name |
| 1 |
Vehicle Direction Alert Alarm Warning Module Procedure
- Disconnect the electrical connector.
- Use a small flat bladed tool and insert along the top edge in the recessed notches and push in both tabs to release the upper edge of the module.
- Then slide upward to disengage the lower tabs of the module from the bracket.
- Refer to Control Module References
for set-up and programming information.
|