October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Lubricate the fuel tank pressure sensor rubber grommet with clean engine oil in order to aid in installation.
- Install the fuel tank pressure sensor (1) into the top of the fuel tank module.
Courtesy of GENERAL MOTORS CORP.
- Connect the fuel tank pressure sensor electrical connector (1).
Courtesy of GENERAL MOTORS CORP.
- Install the EVAP canister access cover.
- Install the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement
.