LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Identifying Fuel Tank Pressure Sensor
    GM1767512Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the fuel tank pressure sensor rubber grommet with clean engine oil in order to aid in installation.
  2. Install the fuel tank pressure sensor (1) into the top of the fuel tank module.
    3. Fig 2: Identifying Fuel Tank Pressure Sensor Electrical Connector
    GM1767511Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel tank pressure sensor electrical connector (1).
    4. Fig 3: View Of EVAP Canister Access Cover In Right Rear Wheelhouse
    GM561137Courtesy of GENERAL MOTORS CORP.
  4. Install the EVAP canister access cover.
  5. Install the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement .
scientia non olet · About LEMON Manuals