Removal Procedure

Remove the rear fascia. Refer to REAR BUMPER FASCIA REPLACEMENT .

Fig 1: Identifying Rear Object Sensor Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connector (1) from the rear object sensor.

Fig 2: Identifying Sensor Housing Locking Tabs
Courtesy of GENERAL MOTORS CORP.
Release the locking tabs (1) attaching the sensor to the sensor housing.

Fig 3: Identifying Rear Object Sensor
Courtesy of GENERAL MOTORS CORP.
Remove the rear object sensor (1) from the sensor housing.

Fig 4: Identifying Rear Object Sensor Retainer Ring
Courtesy of GENERAL MOTORS CORP.
Remove the rear object sensor retainer ring (1) from the sensor.