Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the drain plug and tighten to 33 N.m (24 lb ft).
- Fill the differential carrier assembly with axle lubricant. Use the correct fluid. Refer to Approximate Fluid Capacities . Adhesives, Fluids, Lubricants, and Sealers .
- Install the fill plug and tighten to 33 N.m (24 lb ft).
- Install the front differential carrier shield, if equipped. Refer to Shield Replacement .
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution
.