Memory Seat Control Module Replacement

Fig 1: View Of Memory Seat Control Module & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front driver seat. Refer to Front Seat Replacement - Bucket (Tahoe with HP2) or Front Seat Replacement - Bucket (without HP2) .
1	Driver Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Tahoe with HP2) or Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) or Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) .
2	Driver Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (without HP2) or Front Seat Cushion Inner Trim Panel Replacement (Tahoe with HP2) .
3	Driver Seat Riser Finish Cover Procedure: Pull rearward to disengage the cover from the seat riser.
4	Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (Tahoe with HP2) or Seat Cushion Trim Cover and Pad Replacement (without HP2) .
5	Memory Seat Module Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
6	Memory Seat Module Procedure Disconnect the electrical connector. Refer to Control Module References for programming and set-up information.