October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Distance Sensing Cruise Control Module Replacement
WARNING: This page is about a different car, the 2010 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
| 1 |
Cruise Control Module Assembly
Procedure
- Loosen the bolts that hold the cruise control module into the T-slots on the tie bar.
- Disconnect the electrical connector.
- Slide the module out of the T-slots on the bracket.
- Replace the module by sliding the assembly into the T-slots on the bracket and tighten.
Mandatory tightening sequence.
- Verify proper alignment of the module. Refer to Distance Sensing Cruise Control Aiming .
- For replacement and setup information, refer to Control Module References
.
Tighten:
9 N.m (80 lb in)
|